ComponentsPneumaticsPneumatic actuationInternational standard cylindersPneumatic Cylinders Series 61, Ф32 - Ф125Pneumatic Cylinders Series 61, Ф6361M6R063A0150 - 61M6R063A0150 CYLINDERS SERIES 61, NORM
Facebook LinkedIn WhatsApp Telegram Viber Facebook Messenger Pinterest
  • Products

61M6R063A0150 CYLINDERS SERIES 61, NORM

Description
Single, double-acting, magnetic, cushioned Ф 63 mm (ISO 15552)

Rolled stainless steel rod Clean design Adjustable pneumatic Cushioning. Cylinders Series 61 have been designed to comply with the dimensions laid down in the ISO 15552 standards (corresponding to the previous DIN/ISO 6431/ VDMA 24562 standards).

In compliance with ISO 15552 standards and with the previous DIN/ISO 6431 - VDMA 24562 standards

A permanent magnet, mounted on the piston in these cylinders, enables information to be received regarding the piston position by means of proximity switches mounted in grooves along the cylinder profile.

The mounting brackets used on the endblocks tube are designed in an extremely secure way, making use of the cylinder tie-rods positioned internally and not visible on the assembled cylinders.

These grooves can be covered with a slot cover profile.

This cylinder series is equipped with adjustable end-stroke cushioning. Moreover, these cylinders are equipped with a echanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke.

Technical parameters
Scheme
Scheme
Function / operation
double-acting, through-rod, front and rear cushioned
Bore
63 mm
Stroke
150 mm
Cushioning
adjustable end-stroke cushioning, font 17 mm, rear 16 mm (option - wtihout cushioning )
Type of construction
with tie-rods, profile tube
Materials
aluminium end-blocks, NBR seals, PU rod, other parts see coding
Mounting
with tie-rods, front flange, rear flange, feet, centre trunnion, front and rear trunnion, swivel combination
Operating temperarure
0°C .. +80°C (with dry air min -20°C, with optional FKM seals up to +130°C, with optional low temperature -40°C, -50°C .. +60°C)
Operating pressure
1 .. 10 bar
Fluid
filtered air, without lubricant; if lubricated air is used, it is recommanded to use ISOVG32 oil. Once applied the lubrication should never be interrupted.
Speed
10 .. 1000 mm/sec (without load)
magnet for proximity sensors in piston
standard
PDF technical parameters from manufacturer
PDF DEU.1.1.25.pdf PDF 61-ENG.pdf PDF SPA.1.1.25.pdf PDF FRA.1.1.25.pdf PDF ITA.1.1.25.pdf

Write us

Please fill in all the fields.







Нагоре