ComponentsPneumaticsValves and solenoid valvesDirectly and indirectly operated 2/2 - 3/2 solenoid valvesSeries W directly operated solenoid valvesDouble sided manifold with front outletsP204-03 - P204-03 DOUBLE MANIFOLD FRONT OUT LETS, NORM
P204-03 DOUBLE MANIFOLD FRONT OUT LETS, NORM
Description
Series W directly operated solenoid valves are available as:
3/2-way - Normally Closed (NC) and Normally Open (NO)
Series W directly operated solenoid valves are available as 3/2-way either NC or NO. Both versions can be mounted on single sub-bases or manifolds and they are equipped with a manual override which make the plants setting easier.
3/2-way - Normally Closed (NC) and Normally Open (NO)
Series W directly operated solenoid valves are available as 3/2-way either NC or NO. Both versions can be mounted on single sub-bases or manifolds and they are equipped with a manual override which make the plants setting easier.
Technical parameters
Number of valves
4
Ports
Ø3
Function / operation
3/2 NC - 3/2 NO
Operation
direct acting poppet type
Connection
on subbase with ISO 15218 interface by means of screws
Nominal diameter
0,8 - 1,5 mm
Nominal flow rate Kv
14 … 35 Nl/min (air @ 6 bar ΔP 1 bar)
Operating pressure
0 ÷ 5 ... 10 bar
Operating temperarure
0°C ÷ 50°C
Fluid
clean air, without lubrication, if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Response time
ON <10 msec – OFF <15 msec
Installation
in any position
Materials
Body: PBT technopolymer; Seals: PU, NBR (FKM on demand); Internal parts - stainless steel
Voltage
12 V DC - 24 V DC - 48 V DC
Voltages tolerances
±10%
Power consumption
2 W - 1 W (24 V DC only)
Duty cycle
ED 100%
Connection
with connector DIN EN 175 301-803-C (8 mm) - cables L = 300 mm
Protection class
IP65 with connector
Write us
Please fill in all the fields.
