ComponentsIndustrial AdhesivesInstant (Cyaniacrylate) AdhesivesCyanoacrylate Ethyl AdhesivesIS23 - Fluid, general purposeL IS23 500 - IS23500 Fl 500 g Istant 23, General purpose
IS23500 Fl 500 g Istant 23, General purpose
Description
Cyanacrylate adhesives are for the instant and structural bonding of rubber, metals, ceramic, leather and a variety of plastics. Best results can be obtained with joint gaps of less than 0.1mm up to 0.2mm for special grades.
The service temperature range is between -50°C and +80°C, although new high-temperature resistant formulations are available for use up to 200°C. For porous surfaces or for vertical application a gel grade is available.
The service temperature range is between -50°C and +80°C, although new high-temperature resistant formulations are available for use up to 200°C. For porous surfaces or for vertical application a gel grade is available.
Technical parameters
Application
General purpose for rubbers and plastics. Medium setting.
Chemical composition
ethyl cianoacrylate
Viscosity
40 - 80 25°C –mPa.s
Max.gap filling
10 – 60 microns
Speed of cure
medium
Operating temperarure
-50°C + 80°C
Write us
Please fill in all the fields.
