ComponentsPneumaticsValves and solenoid valvesDirectly and indirectly operated 2/2 - 3/2 solenoid valvesSeries K directly operated solenoid valves3/2-way NC solenoid valve (in-line electrical connection)K000-303-KD3 - K000-303-KD3 SOLENOID VALVES IN LINEA, NORM
K000-303-KD3 SOLENOID VALVES IN LINEA, NORM
Description
Series K directly operated solenoid valves are available as:
2/2-way - Normally Closed (NC)
3/2-way - Normally Closed (NC) and Normally Open (NO)
The Series K directly operated solenoid valves can be mounted on single sub-bases or manifolds. Thanks to the same mounting pad 2/2-way and 3/2-way versions can be installed on the same manifold.
The manual override is available only for the 3/2-way versions.
2/2-way - Normally Closed (NC)
3/2-way - Normally Closed (NC) and Normally Open (NO)
The Series K directly operated solenoid valves can be mounted on single sub-bases or manifolds. Thanks to the same mounting pad 2/2-way and 3/2-way versions can be installed on the same manifold.
The manual override is available only for the 3/2-way versions.
Technical parameters
Scheme

Voltage
24V DC
Operating pressure
0-7 bar
Function / operation
2/2 NC - 3/2 NC - 2/2 NO - 3/2 NO
Operation
direct acting poppet type
Connection
оn subbase by means of screws
Nominal diameter
0,6 - 1 mm
Nominal flow rate Kv
0,12 - 0,30 l/min
Operating temperarure
0°C ÷ 50°C
Fluid
clean air, without lubrication, if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Response time
ON <10 msec – OFF <10 msec
Installation
in any position
Materials
Body: brass - PBT technopolymer; Seals: NBR or FKM; Internal parts - stainless steel
Voltages tolerances
±10%
Power consumption
1 W
Duty cycle
ED 100%
Connection
connector - thin cabels L = 300 mm
Protection class
IP50
Write us
Please fill in all the fields.
.png)