ComponentsPneumaticsPneumatic actuationInternational standard cylindersCylinders Series 63 END LOCK, Ф32 - Ф12563MP2C032A0075FL - 63MP2C032A0075FL CYLINDER S.63 PROFILE, NORM
63MP2C032A0075FL CYLINDER S.63 PROFILE, NORM
Description
END LOCK pneumatic cylinders are fitted with automatic mechanical end stroke locks which guarantee safe and secure holding of the cylinder rod in both the fully retracted and fully extended positions.
The locks activate and release automatically, without the need for external signals or commands and cylinder END LOCK Series 63 comply with ISO 15552.
The automatic mechanical lock therefore makes the END LOCK cylinders Series 63 highly suitable for use in sectors and for applications where it is essential to lock the cylinder’s position, both to avoid sliding during long stops.
Тheir capability to withstand external forces, that are much higher than the force exerted by the piston, makes the END LOCK cylinder the ideal solution for applications where a greater degree of safety is required.
Benefits:
- Robust design
- High reliability
- Locking force greater than thrust force of cylinder (6bar)
- Automatic mechanical end-endstroke: front; rear; front & rear
The locks activate and release automatically, without the need for external signals or commands and cylinder END LOCK Series 63 comply with ISO 15552.
The automatic mechanical lock therefore makes the END LOCK cylinders Series 63 highly suitable for use in sectors and for applications where it is essential to lock the cylinder’s position, both to avoid sliding during long stops.
Тheir capability to withstand external forces, that are much higher than the force exerted by the piston, makes the END LOCK cylinder the ideal solution for applications where a greater degree of safety is required.
Benefits:
- Robust design
- High reliability
- Locking force greater than thrust force of cylinder (6bar)
- Automatic mechanical end-endstroke: front; rear; front & rear
Technical parameters
Scheme

Type of construction
Front lock
Bore
32 mm
Stroke
75 mm
In compliance with standards
ISO 15552
Function / operation
double-acting
Mounting
with front / rear flange, foot mounting, with front / rear / centre / swivel trunnion
Operating temperarure
standard: 0°C ÷ 80°C (with dry air -20°C)
Operating pressure
2 ÷ 10 bar
Fluid
filtered air in class 7.8.4, according to ISO 8573-1. If lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
Write us
Please fill in all the fields.
